Owners Manual

ManualsBrandsMITSUBISHI ManualsAutomotiveMitsubishi L200 2011 Owners Manual.pdf

121

122

123

124

125

126

127

128

129

130

Economical driving

E00600100620

For economical driving, there are

some technical re-

quirements that have to be met. The prerequisite

for low fuel consumption is a properly adjusted en-

gine. In order to achieve longer life of the vehicle

and the most economical operation, we recommend

you to have the vehicle checked at regular intervals

in accordance with the service standards.

Fuel economy and generation of exhaust gas and

noise are highly influenced by personal driving hab-

its as well as the particular operating conditions.

The following points should be observed in order

to minimize wear of brakes, tyres and engine as

well as to reduce environmental pollution.

Starting

Avoid rapid acceleration and sudden starts; such op-

eration will result in higher fuel consumption.

Shifting

Shift only at an appropriate speed and engine

speed. Always use the highest gear possible.

The transfer shift lever should be set to “2H” when

driving 4WD vehicles on normal roads and express

ways to obtain best possible fuel economy.

City traffic

Frequent starting and stopping increases the aver-

age fuel consumption. Use roads with smooth traf-

fic flow whenever possible. When driving on con-

gested roads, avoid use of a low gear at high en-

gine speeds.

Idling

The vehicle consumes fuel even during idling.

Avoid extended idling whenever possible.

Speed

The higher the vehicle speed,

the more fuel con-

sumed. Avoid driving at full speed. Even a slight re-

lease of the accelerator pedal will save a significant

amount of fuel.

Tyre inflation pressure

Check the tyre inflation pressures at regular inter-

vals. Low tyre inflation pressure increases road re-

sistance and fuel consumption. In addition, low

tyre pressures adversely affect tyre wear and driv-

ing stability.

Load

Do not drive with unnecessary articles in the cargo

area. Especially during city driving where frequent

starting and stopping is necessary, the increased

weight of the vehicle will greatly affect fuel con-

sumption.

Cold engine starting

Starting of a cold engine consumes more fuel.

Unnecessary fuel consumption is also caused by

keeping a hot engine running. After the engine is

started, commence driving as soon as possible.

Air conditioning*

The use of the air conditioning will increase the

fuel consumption.

Driving, alcohol and drugs

E00600200012

Driving after drinking alcohol is

one of the most fre-

quent causes of accidents.

Your driving ability can be seriously impaired even

with blood alcohol levels far below the legal mini-

mum. If you have been drinking, don’t drive. Ride

with a designated non-drinking driver, call a cab or

a friend, or use public transportation.

Drinking coffee or taking a cold shower will not

make you sober.

Similarly, prescription and nonprescription drugs af-

fect your alertness, perception and reaction time.

Consult with your doctor or pharmacist before driv-

ing while under the influence of any of these medi-

cations.

WARNING

NEVER DRINK AND DRIVE.

Your perceptions are less accurate,

your

reflexes are slower and your judgment is

impaired.

Starting and driving

4-02

OCRE12E1