Owners Manual

Cooling (vehicles with air conditioning)
E00701900424
LHD
RHD
1.
Set the mode selection dial
to the “
” posi-
tion.
2.
Set the air selection
lever to the “
” (out-
side) position.
3. Push the air conditioning switch (B).
4. Change the
temperature by turning the con-
trol dial clockwise or anticlockwise.
5. Select the desired blower speed.
CAUTION
l
If the outside air is dusty or otherwise con-
taminated, or if high cooling performance
is desired, set air selection lever to the
“ ” (recirculation) position and the tem-
perature control dial all
the way to the left.
Set to the “
” (outside) position period-
ically to increase ventilation
so that the
windows do not become fogged up.
Combination of unheated air and heated air
E00702000451
Select the mode selection dial to the position
shown in the illustration and
set the air selection lev-
er to the “
” (outside) position.
The
air
flow
will
be
directed to the leg area and the
upper part of the passenger compartment. Select
the desired blower speed.
LHD
RHD
Warm air flows to the leg area and unheated or
slightly warm air (depending upon
temperature set-
ting) flows to the upper part of the passenger com-
partment.
Demisting of the windscreen and door windows
E00702100579
CAUTION
l
For safety, make sure you
have a clear
view through all the windows.
To remove frost or mist from the windscreen and
door
windows,
use
the
mode
selection dial (“
”
or “ ”).
For pleasant driving
5-06
5
OCRE12E1
Presented by http://mmc-manuals.ru/ ©