Owners Manual

NOTE
l
When
stowing the jack handle,
align the black-
marked part (I) of the jack handle with the
holder (J).
Club cab
The tools, jack, and jack
handle are stored under
the floor on the left-hand side of the cargo space.
1. Raise the left side seat cushion. Refer to
“Folding up the seat cushion (Club cab)” on
page 2-07.
Tip forward the seatback of the driver seat.
Slide the driver seat forward.
2. Open the lid.
3. Remove the securing band (A), and then take
out the tools (B).
4. Remove the securing nut (C), and then take
out the jack (D).
5. Remove the jack handle (E) from the holder
(F), and then take out the jack handle.
6. Reverse the removing procedure when stor-
ing the tools, jack and jack handle.
NOTE
l
When stowing the jack
handle, align the col-
oured marking on the jack handle with that
on the holder, and fit the jack in the holder.
Double cab
Except for vehicles with rear retractable power
window
The tool (wheel nut wrench only), jack, and jack
handle are located behind the rear seat.
1. Tip forward the seatback of the rear seat.
(Refer to “Folding the seatback forward” on
page 2-07.)
2. <Type 1>
Remove the wheel nut wrench (A) from the
holder (B), and take out the wrench.
<Type 2>
For emergencies
6-10
6
OCRE12E1
Presented by http://mmc-manuals.ru/ ©