Owners Manual

4. Remove the jack handle (G) from the holder
of the back panel (H), and take out the handle.
5. Reverse the removing procedure when stor-
ing the tool, jack and jack handle.
NOTE
l
When stowing the wheel nut wrench, insert it
into the holder on
the back panel as illustrated.
To use the jack handle (Club cab, Dou-
ble cab with rear retractable power
window only)
E00802400124
1. While pressing the snap pin
(A) on the han-
dle that has a black marking, withdraw and re-
move the inner handle (B).
2. Reverse the inner handle (B) then, while press-
ing the snap pin
(C), insert it into the outer
handle (D) until it is locked by snap pin as il-
lustrated.
3. While pressing the snap pin (F) on the assem-
bled handle (E), insert the white-marked han-
dle (G) until it is locked by snap pin as illus-
trated.
For emergencies
6-12
6
OCRE12E1
Presented by http://mmc-manuals.ru/ ©