Owners Manual

Type 2
1. Remove the screws (A) from
the lamp unit,
and then remove the lens and cover.
2. Remove the bulb by pulling it out.
3. To install the bulb, perform the removal
steps in reverse.
Front room lamp and personal lamps*
E01004700364
1. Insert
a straight blade
(or minus) screwdriver
into the notch of
the lens and pry gently to re-
move it.
Remove the bulb from the lamp holder.
NOTE
l
Wrap
a piece of cloth
around the tip of the
screwdriver in order to avoid scratching the
lens.
2. To install the bulb, perform the removal
steps in reverse.
NOTE
l
When installing the lens, align the 2 tabs on
the lens with the holes on the vehicle side.
Rear room lamp*
E01004900119
Type 1
1. Insert a straight blade (or
minus) screwdriver
into the notch of the lens and pry gently to re-
Maintenance
8-32
8
OCRE12E1
Presented by http://mmc-manuals.ru/ ©