Owners Manual

Features and controls

3-67

To remove the key

N00550900171

1. Set the selector lever to the “P” (PARK) position {contin-

uously variable transmission (CVT)}.

2. Push the key in at the “ACC” position and keep it

depressed until it is turned to the “LOCK” position and

remove it.

CAUTION

● Do not remove the ignition key from the ignition

switch while driving. The steering wheel will be

locked, causing loss of control.

● If the engine is stopped while driving, the brake ser-

vomechanism will cease to function and braking

efficiency will deteriorate. Also, the power steering

system will not function and it will require greater

manual effort to operate the steering.

● Do not leave the key in the “ON” position for a long

time when the engine is not running, doing so will

cause the battery to be discharged.

● Do not turn the key to the “START” position when

the engine is running, doing so could damage the

starter motor.

BK0120400US.book 67 ページ２０１０年５月１２日　水曜日　午前１０時５０分