Dismantling Guide

Pull up the lever of the Service Plug and then remove the Service Plug by pulling upward
on the lever.
WARNING;
After removing the Service Plug, keep it in a secure place away from other dismantlers to
prevent accidental handling/improper re-installation.
There are some high voltage components and wiring cables which retain high voltage for 5
minutes after disconnecting the 12V battery. When it is necessary to cut the high voltage
components and wiring cables, wait at least 5 minutes after cutting before commencing the
next action.
at
7) Measurement of the Main drive lithium-ion battery's voltage
WARNING;
Always wear eye protection (safety glasses) to protect your eyes from flying debris.
Remove the undercover for the Main drive lithium-ion battery
12