Dismantling Guide

Step 3: Removing the Main Drive Lithium-ion Battery From the Vehicle
WARNING;
Before removing the Main drive lithium-ion battery, be sure that the procedure for shutting off
the high voltage or discharging the Main drive lithium-ion battery has been completed.
Only use procedures described in this guide to remove the Main drive lithium-ion battery.
Using different procedures increase the risk of injury and may cause damage to the battery.
Always wear appropriate personal protection equipment during this work. High voltage may
remain inside of the Main drive lithium-ion battery, even after completion of the high voltage
shut down or discharge of the Main drive lithium-ion battery.
If it is necessary to cut the body in order to remove the Main drive lithium-ion battery due to
body deformation, never cut the Main drive lithium-ion battery, high voltage wiring, or other
high voltage components.
The Main drive lithium-ion battery is heavy, appproximately 507 lbs. To remove and move the
battery, use only equipment with sufficient weight capacity.
1. Remove the work hole lid at the bottom of the
Main drive lithium-ion battery, and then remove
the Main drive lithium-ion b
attery cable.
AC902601AB
Main drive li-ion battery cable
Vehicle front
2. When the work No. 1 is difficult or when the
maintenance work of the electric motor unit room
must be necessarily performed, remove the Main
drive lithium-ion battery cable of the inverter.
AC902602AB
Main drive li-ion battery cable
Vehicle front
Vehicle front
CAUTION;
Be sure to release the lock on the connector
with your hands, using a tool may damage the
connector.
3. Unlock the connector by sliding the lock, and then
disconnect it.
AC901490
AB
Unlock
18