Dismantling Guide

Removal service points
<<A>> Rubber boot discussion
Disengage the hook of the rubber boot and push it
out of the vehicle (towards under the vehicle).
<<B>> Main drive lithium-ion battery cable
disconnection
1. Remove the inner cable mounting bolts (2
locations).
2. Remove the outer cable mounting bolts (2
locations).
3. Pull out the cable from the Main drive lithium-ion
battery.
<<C>> Quick charging cable disconnection
(if applicable)
1. Remove the inner cable mounting bolts (2
locations).
2. Remove the outer cable mounting bolts (2
locations).
3. Pull out the cable from the Main drive lithium-ion
battery.
<<D>> Main drive lithium-ion battery
assembly removal
1. Attach the removed work hole lid and O-ring to the Main
drive li-ion
battery so that no water, foreign material,
etc. can enter the inside of the Main drive li-ion battery.
2. Use the following special tools and 2 wood blocks
(100 x 100 x 1500 mm).
(1) Remove the handle of the EV battery cart
(special tool: MB992336) and set the wood
blocks.
ACA02499
<LH drive vehicles>
AB
ACA02555
AB
<LH drive vehicles>
AC902204
AB
<RH drive vehicles>
AC902205AB
Outer cable
mounting bolt
Inner cable
mounting bolt
AC902206
AB
Outer cable
mounting bolt
Inner cable
mounting bolt
AC902207
AB
MB992336
Wood block
21