Service Manual

6-18

For emergencies

How to change a tire (Vehicles equipped

with spare tire)

N00836900819

Before changing a tire, first stop your vehicle in a safe, flat

location.

1. Park the vehicle on level and stable ground.

2. Set the parking brake firmly.

3. On vehicles equipped with manual transaxle, stop the

engine and move the gearshift lever to the “R” (Reverse)

position.

On vehicles equipped with continuously variable trans-

mission (CVT), move the selector lever to the “P”

(PARK) position, and stop the engine.

4. Turn on the hazard flashers and set up a warning triangle,

flashing signal light, etc., at an adequate distance from the

vehicle, and have all your passengers exit the vehicle.

5. To prevent the vehicle from rolling when it is raised on the

jack, place chocks or blocks (A) at the tire that is diago-

nally opposite from the tire (B) you are changing.

WARNING

● The jack should not be used for any purpose other

than to change a tire.

● Never get under the vehicle or put any portion of

your body under the vehicle while it is supported by

the jack.

BK0162600US.book 18 ページ２０１３年３月２２日　金曜日　午後２時４１分