Service Manual

Seat and restraint systems

2-29

Examples of child restraint systems compatible with the

LATCH system

N00419000114

Using the LATCH system

N00419100232

1. In order to securely fasten the tether strap, remove the

head restraint from the location where you wish to install

the child restraint system.

2. Open the gap a little between the seat cushion (A) and the

seatback (B) with your hand to locate the lower anchors

(C).

3. Push the anchor connectors (D) on the child restraint sys-

tem into the lower anchors (C) in accordance with the

instructions provided by the child restraint system manu-

facturer.

Remember, the lower anchors provided with your

vehicle are designed to secure suitable child restraint

systems compatible with the LATCH system in the

outboard positions of the rear seats only. The anchor

connectors are NOT designed to secure a suitable child

restraint system in the center position of the rear seat.

A- Rear-facing child restraint system

B- Front-facing child restraint system

C- Child restraint system lower anchor connectors

D- Tether strap

(These are only examples.)

BK0162600US.book 29 ページ２０１３年３月２２日　金曜日　午後２時４１分