MY Owners Manual

Multi information display
Instruments and controls 6-11
6
To return the display to 0, hold down the
multi information display switch for about 2
seconds or more. Only the currently dis-
played value will be reset.
Example
If tripmeter is displayed, only tripmeter
will be reset.
E00522502021
Displays the approximate time until the next
periodic inspection recommended by
MITSUBISHI MOTORS. “---” is displayed
when the inspection time has arrived.
1. Displays the time until the next periodic
inspection.
2. This informs you that a periodic inspec-
tion is due. We recommend you to consult
a MITSUBISHI MOTORS Authorised
Service Point.
At that time, when the operation mode is
changed from OFF to ON, the warning
display is displayed for a few seconds on
the information screen.
3. After your vehicle is inspected at a
MITSUBISHI MOTORS Authorised Ser-
vice Point, it displays the time until the
next periodic inspection.
The “---” display can be reset while the oper-
ation mode of the power switch is in OFF.
Example usage of tripmeter and tripmeter
It is possible to measure two currently
travelled distances, from home using trip-
meter and from a particular point on
the way using tripmeter .
To reset the tripmeter
NOTE
 When disconnecting the auxiliary battery ter-
minal, the memory of tripmeter and
are cleared, and the display returns to “0”.
Service reminder
NOTE
 Depending on the vehicle specifications, the
displayed time may differ from the next peri-
odic inspection time recommended by
MITSUBISHI MOTORS.
In addition, the display settings for the next
periodic inspection time can be modified.
To modify the display settings, have it
adjusted at a MITSUBISHI MOTORS
Authorised Service Point.
For more details, consult a MITSUBISHI
MOTORS Authorised Service Point.
NOTE
 The distance is shown in units of 100 km
(100 miles). The time is shown in units of
months.
To reset
BK0203201EN.book 11 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分