MY Owners Manual

Multi information display
6-18 Instruments and controls
6
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch in from °C to °F, or from °F to °C.
The setting is changed to the selected tem-
perature unit.
E00523201741
The language of the multi information display
can be switched.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
Refer to “Changing the function settings”
on page 6-15.
2. Lightly press the multi information dis-
play switch to select “LANGUAGE” (lan-
guage setting).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to
display “LANGUAGE”.
4. Lightly press the multi information dis-
play switch to select the desired language.
5. If you hold down the multi information
display switch for about 2 seconds or
more, the setting is changed to the
selected language.
E00523301625
The language used in the Bluetooth
®
2.0
interface (if so equipped) can be changed
automatically to the same language as that
shown in the multi information display.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
Refer to “Changing the function settings”
on page 6-15.
NOTE
 The temperature value on air conditioner
panel is switched in conjunction with outside
temperature display unit of the multi infor-
mation display.
However, “°C” or “°F” are not shown to tem-
perature display of an air conditioner.
 On vehicles equipped with Mitsubishi Multi-
Communication System (MMCS), the tem-
perature value of the air conditioner screen
of Mitsubishi Multi-Communication System
(MMCS) is switched in conjunction with
outside temperature display unit of the multi
information display.
However, “°C” or “°F” are not shown to the
air conditioner screen.
Changing the display language
NOTE
 If “---” is selected in the language setting, a
warning message is not displayed when there
is a warning display or interrupt display.
Changing the language coopera-
tive control
BK0203201EN.book 18 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分