MY Owners Manual

Multi information display
6-20 Instruments and controls
6
1. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
Refer to “Changing the function settings”
on page 6-15.
2. Lightly press the multi information dis-
play switch to select “ALARM” (rest time
setting).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to
display “ALARM”.
4. Lightly press the multi information dis-
play switch to select the time until the dis-
play.
5. Press and hold the multi information dis-
play switch for about 2 seconds or more,
the setting is changed to the selected time.
E00529100396
It is possible to change the turn-signal sound.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
Refer to “Changing the function settings”
on page 6-15.
2. Lightly press the multi information dis-
play switch to select (changing the
turn-signal sound).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from 1 (turn-signal sound 1) to 2
(turn-signal sound 2), or from 2 to 1.
The setting changes to the selected turn-
signal sound.
E00523601875
All of the function settings can be returned to
their factory settings.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
Refer to “Changing the function settings”
on page 6-15.
2. Lightly press the multi information dis-
play switch to select “RESET” (returning
to the factory settings).
3. When you press and hold the multi infor-
mation display switch for about 5 seconds
or more, the buzzer sounds and all of the
function settings are returned to the fac-
tory settings.
NOTE
 The drive time is reset when the operation
mode of the power switch is put in OFF.
Changing the turn-signal sound
Returning to the factory settings
NOTE
 The factory settings are as follows.
•Average fuel consumption reset mode: A
(Auto reset)
•Fuel consumption display unit: L/100 km
•Temperature unit: °C (Celsius)
•Display language: ENGLISH or RUSSIAN
•Cooperative language setting: A (language
cooperation enabled)
•Operation sounds: ON (Operation sounds
on)
•“REST REMINDER” display: OFF
•Turn-signal sound: Turn-signal sound 1
BK0203201EN.book 20 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分