MY Owners Manual

Indicator lamp, warning lamp, and information screen display list
Instruments and controls 6-33
6
E00524201836
The operation status of each system is displayed on the information screen. Refer to the appropriate page for the system for further details.
Other interrupt displays
Screen System operation status Reference
When operating the Plug-in Hybrid EV
System, the selector lever is in a position
other than the “P” (PARK) position, or you
pressed the power switch without depress-
ing the brake pedal.
Place the selector lever in theP” (PARK)
position, depress the brake pedal with the
right foot. Then, press the power switch.
Refer to “Starting and stopping the Plug-in
Hybrid EV System” on page 7-12.
Driving power is restricted by the safety
system as the Plug-in Hybrid EV System
has become too hot or too cold.
Yo u do no t ha ve t o t ak e an y act io ns. The
restriction on the driving power will be
released when the Plug-in Hybrid EV Sys-
tem returns to the normal temperature.
If the vehicle had not been refueled about
15 litres or more at one time for a long
time, the engine starts automatically for the
maintenance and fuel system components.
This display may appear frequently
depending on the use conditions of your
vehicle such as when the fuel has been
staying in the fuel tank for a long time.
When the engine is running, this display
shows the state where the drive battery is
charged, and the battery charge mode dis-
play ( ) is displayed.
Refill the 15 litres more at one time. This
display and battery charge mode display
will disappear, and the engine will stop.
BK0203201EN.book 33 ページ 2013年11月19日 火曜日 午前11時50分