MY Owners Manual

Headlamp levelling
6-44 Instruments and controls
6
E00517400103
E00517500612
The direction of the headlamp beam (the
direction which the light shines in) alters
according to the number of people and the
load in the vehicle. Lower the headlamp
angle if it is too high due to the number of
people and/or the load in the vehicle so that
the headlamps’ glare does not distract the
drivers of approaching vehicles. First set the
light switch to the position, then turn
the headlamp levelling switch knob to lower
the beam. The greater the number on the
headlamp levelling switch knob, the lower
the beam will point.
Set the switch to the appropriate position so
that the headlamp beam is level with the road.
E00517601551
This mechanism automatically adjusts the
direction of the headlamps (beam position)
depending on changes in the condition of the
vehicle, such as the number of occupants or
luggage weight. When the headlamps are illu-
minated with the operation mode in ON, the
beam position of the headlamps is automati-
cally adjusted when the vehicle is stopped.
•Turn the combination headlamps and dip-
per switch to the or “ ” position.
•Put the operation mode in ON.
It is possible to modify functions as follows:
•The time that the headlamps remain on can
be changed.
•The coming home light function can be
deactivated.
For further information, please contact your
MITSUBISHI MOTORS Authorised Service
Point.
On vehicles equipped with Mitsubishi Multi-
Communication System (MMCS), screen
operations can be used to make the adjust-
ment. Refer to the separate owner’s manual
for details.
Headlamp levelling
Headlamp levelling switch
*
Except for vehicles with discharge
headlamps
NOTE
CAUTION
Always perform adjustments before driving.
Do not attempt to adjust while driving, as it
could cause an accident.
NOTE
Start adjusting when the knob is at the 0”
position (when the beam is at its highest).
Keep the knob in the “0” position except
when using the knob to lower the headlamp
beam angle.
Always return the knob to the “0” position
when the baggage is removed and the people
have left the vehicle.
Automatic headlamp levelling
*
Veh icles wit h d ischar g e hea dl a mps
BK0203201EN.book 44 ページ 2013年11月19日 火曜日 午前11時50分