MY Owners Manual

Wiper and washer switch
6-48 Instruments and controls
6
the ice has melted and the blades are freed,
otherwise the wiper motor may be damaged.
With the lever in the “INT” (speed-sensitive)
position, the intermittent intervals can be
adjusted by turning the knob (A).
The misting function can be operated with the
operation mode of the power switch in ON or
ACC.
The wipers will operate once if the wiper
lever is raised to the “MIST” position and
released. This operation is useful when it is
drizzling, etc. The wipers will continue to
operate while the lever is held in the “MIST”
position.
E00517001409
The windscreen wipers can be operated with
the operation mode of the power switch in
ON or ACC.
If the blades are frozen to the windscreen or
rear window, do not operate the wipers until
the ice has melted and the blades are freed,
otherwise the wiper motor may be damaged.
MIST- Misting function
The wipers will operate once.
OFF- Off
INT- Intermittent (Speed sensitive)
LO- Slow
HI- Fast
To a djus t int er mitt ent inter v als
1- Fast
2- Slow
NOTE
 The speed-sensitive-operation function of
the windscreen wipers can be deactivated.
For further information, we recommend you
to consult a MITSUBISHI MOTORS
Authorised Service Point.
On vehicles equipped with Mitsubishi Multi-
Communication System (MMCS), screen
operations can be used to make the adjust-
ment. Refer to the separate owner’s manual
for details.
Misting function
Veh icles equipp e d wit h rain sen sor
BK0203201EN.book 48 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分