MY Owners Manual

Wiper and washer switch
6-52 Instruments and controls
6
E00510101384
The headlamp washer can be operated with
the operation mode in ON or ACC and the
lamp switch at the “ ” position.
Push the button once and the washer fluid
will be sprayed on to the headlamps.
INT - The wiper operates continuously
for several seconds then operates
intermittently at intervals of about
every 8 seconds
OFF - Off
-
The washer fluid will be sprayed
onto the rear window when the
knob is turned fully in either direc-
tion.
The wipers operate automatically
several times while the washer fluid
is being sprayed
NOTE
 The rear window wiper will automatically
perform several continuous operations if the
selector lever is put in the “R” position while
the windscreen wipers or the rear window
wiper is operating. (automatic operation
mode)
After the automatic operation, the rear win-
dow wiper will stop operating if the knob is
in the “OFF” position. If the knob is in the
“INT” position, the rear window wiper will
return to the intermittent operation.
It is possible to set the rear window wiper to
perform the automatic operation only if the
selector lever is put in the “R” position while
the rear window wiper is operating with the
knob in the “INT” position.
For further information, we recommend you
to consult a MITSUBISHI MOTORS
Authorised Service Point.
 If the knob is in the “OFF” position, turn the
knob to the “INT” position twice quickly to
operate the rear window wiper continuously.
(continuous operation mode)
Turn the knob to the “OFF” position to stop
the rear window wiper continuous operation.
 The interval for intermittent operation can be
adjusted.
For further information, we recommend you
to consult a MITSUBISHI MOTORS
Authorised Service Point.
On vehicles equipped with Mitsubishi Multi-
Communication System (MMCS), screen
operations can be used to make the adjust-
ment. Refer to the separate owner’s manual
for details.
Headlamp washer switch *
NOTE
BK0203201EN.book 52 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分