MY Owners Manual
Starting and stopping the Plug-in Hybrid EV System
7-12 Starting and driving
7
When the operation mode is in any mode
other than OFF, if you close all the doors and
the tailgate then try to lock the doors and tail-
gate by pressing the driver’s or front passen-
ger’s dppr lock/unlock switch, or the tailgate
LOCK switch, a warning display will appear,
and the outer buzzer will sounds and you can-
not lock the doors and tailgate.
E00632301042
If the driver’s door is opened with the Plug-in
Hybrid EV System stopped and the operation
mode in any mode other than OFF, the opera-
tion mode ON reminder inner buzzer sounds
intermittently to remind you to put the opera-
tion mode in OFF.
E00620601295
E00620701443
1. Check that the EV charging cable is not
connected to your vehicle.
2. Fasten the seat belt.
3. Make sure the parking brake is applied.
4. When you press the power switch while
depressing the brake pedal with your right
foot, the READY indicator in the meter
blinks and the activation of Plug-in
Hyblid EV System starts.
5. When the READY indicator changes
from blinking to staying on, the startup of
Plugin-Hyblid EV System is activated and
the vehicle is now ready to drive.
E00620801268
1. Stop your vehicle completely.
Operation mode ON reminder
system
Starting and stopping the
Plug-in Hybrid EV System
Starting the Plug-in Hybrid EV
System
CAUTION
When the Plug-in Hybrid EV System warn-
ing lamp comes on while the READY indi-
cator is on, avoid high-speed driving and
have your vehicle inspected by a MITSUBI-
SHI MOTORS Authorised Service Point as
soon as possible. (Refer to “Plug-in Hybrid
EV System warning lamp” on page 6-39.)
Never attempt to start the engine by pushing
or pulling the vehicle.
CAUTION
Do not press the power switch while holding
the select lever at the operated position.
NOTE
Continue to depress the brake pedal until the
READY indicator in the meter stays on.
You can d rive your vehicle even if the e ngine
is stopped.
Plug-in Hybrid EV System can be started in
any operation mode.
If the READY indicator does not come on,
check the select position indicator. If the
indicator is not indicating "P", press the elec-
trical parking switch to display "P" position.
If the READY indicator does not come on,
turn the power switch to OFF once and, after
a while, press the power switch to start Plug-
in Hybrid EV System.
Stopping the Plug-in Hybrid
EV System
BK0203201EN.book 12 ページ 2013年11月19日 火曜日 午前11時50分