MY Owners Manual

Adaptive Cruise Control System (ACC)*
Starting and driving 7-45
7
You r veh icle runs at a spe e d to w h ich y ou se t.
It is possible to set the speed between approx-
imately 40 and 180 km/h.
The ACC makes control to maintain a follow-
ing distance (time gap) matched with the
vehicle speed between your vehicle and a
vehicle in front while also activating brakes
as necessary.
If the vehicle in front stops, the ACC reacts to
it by stopping your vehicle.
Depress the brake pedal as soon as your vehi-
cle comes to a stop.
•When your vehicle is on a chassis
dynamometer or free rollers.
•When the air pressure in the tyres is not
correct.
•When installing the spare tyre for emer-
gency.
•When tyre chains are attached.
 Be sure to take the following precautions to
keep the system in proper operating condi-
tions.
Improper handling of the system components
may result in degraded sensor performance.
•Avoid application of strong shock loads to
the sensor and never tamper with or remove
the sensor mounting screws.
• The cover in front of the sensor and the sen-
sor should be kept clean.
•Do not cover the sensor mounted area of
the vehicle or the sensor cover with a
sticker or anything such as a grill guard
etc..
•The sensor front cover should not be modi-
fied or painted.
•Avoid using different size tyres from those
specified and maintain even tyre wear.
•Do not modify the suspension of your vehi-
cle.
 When the cover in front of the sensor or the
sensor is deformed for an accident, please do
not use the ACC and contact a MITSUBISHI
MOTORS Authorised Service Point.
CAUTION
When ACC detects no vehicle
in front within the set distance
NOTE
 If the vehicle speed exceed the set speed on
down slope, the system automatically applies
the brake to maintain the vehicle speed.
 When depressing the brake pedal while auto-
matic brake is applied, the brake pedal is felt
solidly, but it is not abnormal. You can more
depress the pedal and it provides greater
braking force.
 Sound is heard while automatic brake, but it
is operated a brake control and not abnormal.
When ACC detects a vehicle in
front within the set distance
NOTE
 If you do not depress the brake pedal within
2 seconds after an automatic stop, you are
alerted to automatic cancellation of the ACC
by a buzzer and display message and the
ACC shift into the ‘standby state’.
The vehicle will then start creeping as the
brakes are released.
BK0203201EN.book 45 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分