MY Owners Manual

Adaptive Cruise Control System (ACC)*
7-54 Starting and driving
7
After cancelling the ACC control (i.e. placing
the system in the ‘standby state’) by pressing
the “CANCEL” switch or depressing the
brake pedal, you can resume the ACC control
at the originally set speed if you push up the
“RES -” switch.
Every time you press the following distance
setting switch, the setting changes sequen-
tially through three options “Long”, “Middle”
and “Short”, cycling back to “Long” after
“Short”. The distance setting is reset when
the operation mode is set to “OFF” or when
the ACC is set to “OFF,” and is automatically
set to “long” when you set the ACC to “ON”
next time.
Following distance setting: “Long”
Following distance setting: “Middle”
Following distance setting: “Short”
If you hold the “ACC ON/OFF” switch
pressed with the operation mode set to “ON”
and the ACC in the ‘OFF state’, the cruise
control is activated. The information screen
of the multi-information display then changes
to the cruise control screen and a buzzer
sounds at the same time.
Cruise control is turned off if you set the
operation mode to “OFF”.
NOTE
 Pressing the switch turns off the ACC even if
it is engaged.
 The set speed is cancelled when the ACC is
turned off or the operation mode is set to
“OFF”.
 If the ACC is in the ‘ON state’ when the
operation mode is set to “OFF”, the system is
set to the ‘OFF state’ when the operation
mode is set to “ON” next time.
To resume the control
NOTE
 The conditions to be met before the ACC
control can be resumed are the same as those
for starting the ACC control.
To change the following distance
setting
NOTE
 The following distance varies as a function
of the speed; the faster the set speed, the
longer the following distance.
To a ct iva te c ru i se co n trol (auto -
matic speed control)
BK0203201EN.book 54 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分