MY Owners Manual
Lane Departure Warning (LDW)*
7-60 Starting and driving
7
Give a short press to the FCM ON/OFF
switch to change the timing at which the fron-
tal collision alarm is triggered. Every time
you press the switch, the alarm timing
changes alternately between “FAR” (earlier
alarming) and “NEAR” (later alarming).
As you make selection, the selected alarm
timing is displayed on the information screen
of the multi-information display. Even after
turning off the FCM or setting the operation
mode to “OFF”, the system retains your last
selected alarm timing in memory.
When “NEAR” is selected
When “FAR” is selected
E00635701021
By recognizing through a camera (A) the lane
in which your vehicle is running, LDW gives
you warning when your vehicle is likely to
drift from its lane with an audible alarm and a
visual alarm displayed on the information
screen of the multi-information display.
E00635801022
The indication on the information screen of
the multi-information display changes as fol-
lows depending on the state of the system.
When you set the operation mode to “ON”,
the “LDW” indicator appears on the informa-
tion screen of the multi-information display,
showing that the system is placed in the ‘ON
state’.
To change alarm ti ming
CAUTION
For the FCM brake prefill, the FCM brake
assist and the FCM braking functions, the
function triggering timing cannot be
changed.
Lane Departure Warning
(LDW)
*
How to operate LDW
Tur n in g o n t he sy stem
BK0203201EN.book 60 ページ 2013年11月19日 火曜日 午前11時50分