MY Owners Manual

Lane Departure Warning (LDW)*
Starting and driving 7-61
7
When you press the LDW switch, the “LDW”
indicator on the information screen of the
multi-information display goes out, showing
that the system is placed in the ‘OFF state’.
Press the switch again, the system returns to
“ON”.
In the standby mode, the system is capable of
recognizing the lane in which your vehicle is
positioned and issuing audible warning when
your vehicle goes out of the lane.
The system automatically shifts from the ‘ON
state’ to the ‘standby state’ if all of the fol-
lowing conditions are simultaneously met.
The “LDW” indicator in the information dis-
play change to indicator (green).
 The vehicle speed is approximately 65
km/h or higher.
 The turn-signal lever is not operated.
 The hazard lamp is not activated.
 The brake pedal is not depressed.
 Environmental conditions are adequate
for the system to recognize the lane mark-
ings on both sides.
 The system has been placed in the ‘ON
state’.
A buzzer sounds intermittently and indication
of “LANE DEPARTURE” appears in the
information display, indicator flashing in
amber when your vehicle is about to leave or
has left the lane in the standby mode.
Turning off the system
NOTE
 When you set the operation mode to “OFF”
with the system “OFF,” the system will be
restored “ON.”
Standby state
NOTE
 The system stays in the “ON” state for about
7 seconds after the hazard lamp has stopped
flashing or the turn-signal lever has returned
to the home position.
Lane departure warning
BK0203201EN.book 61 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分