MY Owners Manual
Listen to Radio
For pleasant driving 8-25
8
Turn the /SEL key to the frequency to lis-
ten to.
Collective search for stations that can be
received.
Press the SCAN key.
When a station is received, this is played for 5
seconds, then the product searches for the
next station.
Register the broadcast station in advance, and
select this at a later time.
1. Tune in to the frequency to register.
2. Hold down any of the keys from the 1RPT
key to the 6 key.
A “Beep” sounds, and the preset key is
registered.
The top 6 stations with a strong signal can be
automatically registered in order with preset
keys in the AUTO-P mode.
Hold down the AUTO-P key.
Switch to the AUTO-P mode, and start auto-
matic station selection.
After completion of operations, the product
will receive the station registered in the preset
key [1].
Manual/Seek Station Selection
/SEL key
(counter-
clockwise)
Reduces the frequency
being received.
/SEL key
(clockwise)
Increases the frequency
being received.
key
(hold down)
Release the button to start
seek station selection, and
when a station is received,
scanning stops.
key
(hold down)
Scan Station Selection
NOTE
Press this button again while receiving the
station to return to normal reception.
Preset Memory
NOTE
The preset memory can register a maximum
of 6 stations for each band.
If a preset key that already has a station reg-
istered is selected, then this is overwritten
with the new preset.
Pressing the preset key will select the previ-
ously registered frequency.
Auto Preset
CAUTION
Please be aware that the formerly-registered
frequency in the memory will be overwrit-
ten.
NOTE
Separate to normal reception preset keys,
this registers in preset keys in the AUTO-P
mode.
Pressing the preset key will select the previ-
ously registered frequency.
Each time the AUTO-P key is pressed, this
switches between normal reception and
AUTO-P mode.
In the AUTO-P mode, manual/seek station
selection, as well as scan operation is also
possible.
BK0203201EN.book 25 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分