MY Owners Manual

Bluetooth® 2.0 interface
For pleasant driving 8-47
8
E00727600096
Yo u can t ur n a vo ic e m od el re gi ste re d wi th
the speaker enrollment function on and off
whenever you want.
Yo u ca n al so r et rain t he s ys tem .
Use the following procedure to perform these
actions.
1. Press the SPEECH button.
2. Say “Voice training.”
3. If you have completed a speaker enroll-
ment process once already, the voice
guide will say either “Enrollment is ena-
bled. Would you like to disable or
retrain?” or “Enrollment is disabled.
Would you like to enable or retrain?”
4. When enrollment is “enabled,” the voice
model is on; when enrollment is “disa-
bled,” the voice model is off. Say the
command that fits your needs.
Say “Retrain” to start the speaker enroll-
ment process and recreate a new voice
model. (Refer to “Speaker enrollment” on
page 8-46.)
E00760601399
Before you can make or receive hands-free
calls or play music using the Bluetooth
®
2.0
interface function, you must pair the Blue-
tooth
®
device and Bluetooth
®
2.0 interface.
Up to 7 Bluetooth
®
devices can be paired
with the Bluetooth
®
2.0 interface.
If multiple paired Bluetooth
®
devices are
available in the vehicle, the cellular phone or
music player most recently connected is auto-
matically connected to the Bluetooth
®
2.0
interface.
You c an al s o chan g e a Bl u etooth
®
device to
be connected.
To pair a Bluetooth
®
device with the Blue-
tooth
®
2.0 interface, follow the steps below.
1. Stop your vehicle in a safe area, firmly
apply the parking brake and push the elec-
trical parking switch.
2. Press the SPEECH button.
3. Say “Setup.”
4. Say “Pairing Options.”
Enabling and disabling the voice
model and retraining
Connecting the Bluetooth
®
2.0
interface and Bluetooth
®
device
NOTE
 Pairing is required only when the device is
used for the first time. Once the device has
been paired with the Bluetooth
®
2.0 inter-
face, all you need is to bring the device into
the vehicle next time and the device will
connect to the Bluetooth
®
2.0 interface auto-
matically (if supported by the device). The
device must have Bluetooth
®
turned ON to
connect.
To pair
NOTE
 Yo u ca nn o t p ai r any Blu et oot h
®
device with
the Bluetooth
®
2.0 interface unless the vehi-
cle is parked. Before pairing a Bluetooth
®
device with the Bluetooth
®
2.0 interface,
confirm that the vehicle is parked in a safe
location.
BK0203201EN.book 47 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分