MY Owners Manual

EV charging cable
Charging 3-7
3
E08301201064
E08301301065
1. Lightly wipe these off with a soft cloth
soaked in a mild soap and water solution.
WARNING
 If the POWER or CHARGING indicator
does not illuminates or the FAULT indica-
tor blinks or illuminates during normal
charging, please contact a MITSUBISHI
MOTORS Authorised Service Point.
 Do not charge when the EV charging
cable is coiled up.
The cable may be heated and resulting in
fire.
 Do not alter or disassemble the EV charg-
ing cable. Doing so could cause a fire, elec-
tric shock or injury.
 Be sure to install the cap to the normal
charge connector and store the EV charg-
ing cable in a place where the cable is not
exposed to water or dust. Entry of foreign
matter such as water or dust in the metal
terminal of the normal charge connector
or charging cable plug may cause a fire or
malfunction. Contact with a metal such as
wire or tool may cause a fire, electric
shock or malfunction.
 Never force the connection if the EV
charging cable or connector shows dam-
age or is not easily connected due to for-
eign material entering the connector or
the outlet. And never use an outlet that is
worn, damaged, or will not hold the plug
firmly. Doing so could cause fire, an elec-
tric shock, or short circuit.
 Pay attention to the following for handling
the EV charging cable.
Damage to the cable could cause a fire,
electric shock, or short circuit.
•Do not drop the cable or do not give
strong impact to it.
•Do not pull with undue force.
•Do not twist.
•Do not drag.
•Do not put an object on top.
•Do not put the cable close to a heating
unit including heater.
CAUTION
 Do not connect the normal charge cable to an
outlet that has a lower rating than the current
value described on the control box.
NOTE
 All indicators are illuminated momentarily
for confirming operation when the charging
cable plug is inserted into an outlet. After
that the POWER indicator and the CHARG-
ING indicator is continuously illuminated.
 The CHARGING indicator will start to blink
when the charging is completed. The
POWER indicator is continuously illumi-
nated while the charging cable plug is
inserted into an outlet.
WARNING
Handling and storing the con-
trol box
CAUTION
 While charging, prevent damage to the con-
trol box by attaching a rope as shown in the
following illustration.
NOTE
 Use a hook with a load capacity over 4 kg.
 Check the rope has no damage and is not
loose before use.
Cleaning the EV charging cable
Hook
Rope
BK0203201EN.book 7 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分