MY Owners Manual

How to change a tyre
9-16 For emergencies
9
5. Remove the wheel nuts with the wheel nut
wrench, then take the wheel off.
6. Clean out any mud, etc. on the hub sur-
face (F), hub bolts (G) or in the installa-
tion holes (H) in the wheel, and then
mount the tyre.
WARNING
 Stop jacking up the vehicle as soon as the
tyre is raised off the ground. It is danger-
ous to raise the vehicle any higher.
 Do not get under a vehicle that is sup-
ported by a jack.
 Do not bump the raised vehicle or leave it
sitting on the jack for a long time. Both
are very dangerous.
 Do not use a jack except the one that came
with your vehicle.
 The jack should not be used for any pur-
pose other than to change a tyre.
 No one should be in your vehicle when
using the jack.
 Do not start the Plug-in Hybrid EV system
while your vehicle is on the jack.
 Do not turn the raised wheel. The tyres
still on the ground could turn and make
your vehicle fall off the jack.
CAUTION
 Handle the wheel carefully when changing
the tyre, to avoid scratching the wheel sur-
face.
WARNING
 Mount the wheel with the valve stem (I)
facing outboard. If you cannot see the
valve stem (I), you have installed the
wheel backwards.
Operating the vehicle with the wheel
installed backwards can cause vehicle
damage and result in an accident.
BK0203201EN.book 16 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分