MY Owners Manual

Towing
For emergencies 9-19
9
2. Align the air valve (C) of the tyre with the
notch (D) in the wheel cover.
3. Push the underside (F) of the wheel cover
into the wheel.
4. Gently push both sides (G) of the wheel
cover and hold it in place with both knees.
5. Gently tap around the circumference of
the wheel cover at the top (H), then press
the wheel cover into place.
E00801504940
If you need to tow your vehicle, contact a
MITSUBISHI MOTORS Authorised Service
Point or a commercial tow truck service.
Transport the vehicle on a flatbed truck or
tow the vehicle with all wheels off the
ground.
In the following cases, contact a MITSUBI-
SHI MOTORS Authorised Service Point and
transport the vehicle with the all wheels on a
carriage.
 The ready indicator illuminates but the
vehicle does not move, or an abnormal
noise is produced.
 Some warning lamp in the meter illumi-
nates.
 Inspection of the vehicle’s underside
reveals that oil or some other fluid is leak-
ing.
 Yo ur veh icle bo dy is se ve re ly da ma ge d or
deformed in the event of an accident.
If a wheel gets stuck in a ditch, do not try to
tow the vehicle.
NOTE
 Full wheel covers have a symbol mark (E)
provided on the reverse side to show the air
valve location.
Before installing the wheel cover to the
wheel, make sure that the opening with the
symbol mark is correctly aligned with the air
valve.
Towing
If your vehicle needs to be
towed
Flat bed type
Dolly type
BK0203201EN.book 19 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分