MY Owners Manual
Replacement of lamp bulbs
11-22 Maintenance
11
E01003200333
When replacing a bulb, use a new bulb with
the same wattage and colour.
E01003304042
Codes in parentheses indicate bulb types.
Codes in parentheses indicate bulb types.
Bulb location and capacity
Outside
Type A: Except for high intensity dis-
charge headlamp type
Front
Type A
Type B
Type B: High intensity discharge head-
lamp type
1- Front turn-signal lamps: 21 W (PY21W)
2- Headlamps, high beam: 60 W (HB3)
3- Headlamps, low beam
Halogen: 55 W (H7)
High intensity discharge: 35 W
4- Position lamps: 5 W (W5W)
5- Front fog lamps: 55 W (H11)
6- Side turn-signal lamps
WARNING
Always consult a specialist when repairing
or replacing the bulbs of high intensity
discharge headlamps.
This is because the power circuit, bulbs
and electrodes generate a high voltage
that could cause an electric shock.
1- High mounted stop lamp
2- Reversing lamps: 21 W (W21W)
3- Licence plate lamps: 5 W (W5W)
4- Rear turn-signal lamps: 21 W (PY21W)
5- Stop and tail lamps
NOTE
The following lamps are not possible to
repair or replace only the bulb.
If you need to repair or replace these lamp
bulbs, contact a MITSUBISHI MOTORS
Authorised Service Point.
•Side turn- signal lamps
•High mounted stop lamp
•Stop and tail lamps
Rear
BK0203201EN.book 22 ページ 2013年11月19日 火曜日 午前11時50分