MY Owners Manual

Replacement of lamp bulbs
Maintenance 11-25
11
2. Pull out the socket (B), and then pull the
bulb out of the socket.
3. To install the bulb, perform the removal
steps in reverse.
1. Turn the socket (A) anticlockwise to
remove it, and then pull the bulb out of
the socket.
2. To install the bulb, perform the removal
steps in reverse.
E01003802199
1. Turn the socket (A) anticlockwise to
remove it, then remove the bulb from the
socket by turning it anticlockwise while
pressing in.
2. To install the bulb, perform the removal
steps in reverse.
Vehicles equipped with high inten-
sity discharge headlamps
*:Front of the vehicle
Front turn-signal lamps
*:Front of the vehicle
BK0203201EN.book 25 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分