MY Owners Manual

Keyless operation system
Locking and unlocking 4-11
4
E00305901715
In order to prevent vehicle theft or the accidental operation of the keyless operation system, the buzzer and the display on the information screen
in the multi-information display are used to alert the driver.
If a warning is activated, always check the vehicle and the keyless operation key. The warning is also displayed if there is a fault in the keyless
operation system.
NOTE
 Functions can be modified as stated below.
For further information, please contact your
MITSUBISHI MOTORS Authorised Service
Point.
On vehicles equipped with Mitsubishi Multi-
Communication System (MMCS), screen
operations can be used to make the adjust-
ment. Refer to the separate owner’s manual
for details.
•Set the confirmation function (blinking of
the turn-signal lamps) to operate only when
the vehicle is locked or only when the vehi-
cle is unlocked.
•Disable the operation confirmation function
(blinking of the turn-signal lamps).
•Change the number of blinks for the opera-
tion confirmation function (blinks of the
turn-signal lamps).
NOTE
Warning activation
Item Display Buzzer Note (Solution)
Detection of failure Inner buzzer sounds
once
There is a fault in the keyless operation system.
Fall of battery voltage Inner buzzer sounds
once
The battery starts to run out, the warning is activated. （The warning is
not activated if the battery is completely dead.）
BK0203201EN.book 11 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分