MY Owners Manual

Electric window control
4-30 Locking and unlocking
4
The driver’s switches can be used to operate
all door windows. A window can be opened
or closed by operating the corresponding
switch.
Press the switch down to open the window,
and pull up the switch to close it.
If the switch for the driver’s window is fully
pressed down/pulled up, the door window
automatically opens/closes completely.
If you want to stop the window movement,
operate the switch lightly in the reverse direc-
tion.
The passenger’s switches can be used to oper-
ate the corresponding passenger’s door win-
dows.
Press the switch down for opening the win-
dow, and pull up the switch for closing.
E00303101263
When this switch is operated, the passenger’s
switches cannot be used to open or close the
door windows and the driver’s switch cannot
open or close any door windows other than
the driver’s door window.
To unlock, press it once again.
E00302401012
The door windows can be opened or closed
for 30 seconds after the engine is stopped.
WARNING
 Before operating the electric window con-
trol, make sure that nothing is capable of
being trapped (head, hand, finger, etc.).
 Never leave the vehicle without removing
the key.
 Never leave a child (or other person who
might not be capable of safe operation of
the electric window control) in the vehicle
alone.
Driver’s switches
Passenger’s switches
NOTE
 Repeated operation with the engine stopped
will run down the battery. Operate the win-
dow switches only while the engine is run-
ning.
 The rear door windows only open halfway.
Lock switch
1- Lock
2- Unlock
WARNING
 A child may tamper with the switch at the
risk of its hands or head being trapped in
the window. When driving with a child in
the vehicle, please press the window lock
switch to disable the passenger’s switches.
Timer function
BK0203201EN.book 30 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分