Owners Manual

Instrument cluster
5-64 Features and controls
5
N00591000025
It is possible to change the language of the
warning messages on the screen.
1. Turn the ignition switch to the “ON” posi-
tion or put the operation mode in ON.
2. Put the gearshift lever or the selector lever
in the “R” (REVERSE) position.
3. Press and hold down the switch (1) to
enter language selection mode (for 6 to 11
seconds).
In this mode, the image appears and the
green indicator (2) comes on.
4. Press the switch until the desired language
appears on the display.
Each time you press the switch, the lan-
guage will change to the next one. When
the warning text flashes, setting is com-
pleted.
N00519001428
N00519101302
The speedometer shows the vehicle speed in
miles per hour (mph) or kilometers per hour
(km/h).
NOTE
 Mirror image is displayed on the screen.
 It is possible to change the display language
of the inside rearview mirror screen.
For details, refer to “Change language or
turn off the inside rearview mirror screen: To
change the language of warning text (3)” on
page 5-64.
 Under certain circumstances, it may become
difficult to see an image on the screen, even
when the system is functioning correctly.
• In a dark area, such as at night.
• When water drops or condensation are on
the lens.
• When sun light or headlights shine directly
into the lens.
To change the language of
warning text (3)
CAUTION
 For safety reasons, do not perform the fol-
lowing operations with the engine running.
Instrument cluster
1- Tachometer  P.5-65
2- Multi-information display  P. 5 - 65
3- Speedometer  P.5-64
4- Multi-information display switch
Speedometer
BK0236100US.book 64 ページ ２０１６年２月１日 月曜日 午前１０時１５分