Owners Manual

Bluetooth® 2.0 interface (if so equipped)
Features and controls 5-93
5
5. Enter in the Bluetooth
®
device the 4-digit
number that has been read out in Step 4.
6. The voice guide will say “Please say the
name of the device after the beep.” You
can assign a desired name for the Blue-
tooth
®
device and register it as a device
tag. Say the name you want to register
after the beep.
7. The voice guide will say “Pairing Com-
plete. Would you like to import the con-
tacts from your mobile device now?”
Answer “Yes,” and the voice guide will
say “Please wait while the contacts are
imported. This may take several minutes.”
Answer “No” to end the pairing process.
If your device requires a specific pairing
code, you need to set the pairing code. Follow
the procedures below.
1. Press the SPEECH button.
2. Say “Setup.”
3. Say “Pairing Options.”
4. Say “Set Code.”
5. The voice guide will say “Do you want
the pairing code to be random or fixed?”
Say “Fixed.”
6. The voice guide will say “Please say a 4-
digit pairing code.” Say a 4-digit number.
7. The voice guide will say “Pairing code set
to <pairing code>.”
When the confirmation function is on, the
system will confirm whether the number
said is acceptable. Answer “Yes.”
Answer “No,” the system will return to
Step 6.
8. The voice guide will say “Do you want to
pair a device now?” Answer “Yes,” the
system will proceed to Step 3 in the pair-
ing process. Refer to the previous section
“To pair.”
N00565100025
If multiple paired Bluetooth
®
devices are
available in the vehicle, the cellular phone or
music player most recently connected is auto-
matically connected to the Bluetooth
®
2.0
interface.
You can connect to the other paired cellular
phone or music player by following setting
change procedures.
1. Press the SPEECH button.
2. Say “Setup.”
3. Say “Select phone.”
NOTE
 Depending on the Bluetooth
®
device, it may
take a few minutes to pair it with the Blue-
tooth
®
2.0 interface.
 If the Bluetooth
®
2.0 interface cannot recog-
nize the Bluetooth
®
device, the voice guide
will say “Pairing has timed out” and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
ports Bluetooth
®
, and try pairing it again.
 If you enter the wrong number, the voice
guide will say “Pairing failed” and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
If your device requires a specific pairing
code, you need to set the pairing code. Refer
to the device manual for pairing code
requirements and read the next section “If
your device requires a specific pairing code”
on page 5-93.
NOTE
 When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask “Is this correct?”
Answer “Yes.”
To change the device tag, answer “No” and
then say the device tag again.
If your device requires a specific pairing
code
Selecting a device
To select a cellular phone
BK0236100US.book 93 ページ ２０１６年２月１日 月曜日 午前１０時１５分