Owners Manual

Bluetooth® 2.0 interface (if so equipped)
5-96 Features and controls
5
6. The voice guide will say “New name,
please.” Say the name you want to regis-
ter as a new device tag.
When the confirmation function is on, the
voice guide will say “<New device tag>.
Is this correct?” Answer “Yes.”
Answer “No,” you can say the new device
tag you want to register again.
7. The device tag is changed.
When the change is complete, the voice
guide will say “New name saved” and
then the system will return to the main
menu.
N00565400015
For the operation of a music player connected
via Bluetooth
®
, refer to “To play tracks from
a Bluetooth
®
device” on page 7-37.
N00565500087
You can make or receive hands-free calls
using a Bluetooth
®
compatible cellular phone
connected to the Bluetooth
®
2.0 interface.
You can also use the phonebooks in the Blue-
tooth
®
2.0 interface to make calls without
dialing telephone numbers.
To make a call P.5-96
Send function P.5-98
Receiving calls P.5-98
Mute function P.5-98
Switching between hands-free mode and pri-
vate mode P.5-98
N00565600020
You can make a call in the following 3 ways
using the Bluetooth
®
2.0 interface:
- By saying a telephone number
- By using the Bluetooth
®
2.0 interface’s
phonebook
- By redialing a telephone number
You can make a call by saying the telephone
number.
1. Press the SPEECH button.
2. Say “Dial.”
3. After the voice guide says “Number
please,” say the telephone number.
4. The voice guide will say “Dialing <num-
ber recognized>.”
The Bluetooth
®
2.0 interface will then
make the call.
When the confirmation function is on, the
system will confirm the telephone number
again. To continue with that number,
answer “Yes.”
To change the telephone number, answer
“No.” The system will say “Number
please” then say the telephone number
again.
Operating a music player con-
nected via Bluetooth
®
How to make or receive hands-
free calls
NOTE
 Hands-free calls may not operate correctly
when you place or receive the call directly
from your cellular phone, instead of using
the Bluetooth
®
2.0 interface.
To m ak e a ca ll
Making a call by using the telephone
number
NOTE
 In the case of English, the system will recog-
nise both “zero” and “oh” (Letter “o”) for the
number “0.”
 The Bluetooth
®
2.0 interface supports num-
bers (0 to 9) and characters (+, # and *).
 The maximum supported telephone number
length is as follows:
• International telephone number: + and tele-
phone numbers (to 18 digits).
• Except for international telephone number:
telephone numbers (to 19 digits).
BK0236100US.book 96 ページ ２０１６年２月１日 月曜日 午前１０時１５分