Owners Manual

USB input terminal (if so equipped)
Features and controls 5-107
5
3. Fix the connector cable on the clips and
close the glove compartment.
N00566901157
1. Park your vehicle in a safe place and turn
the ignition switch to the “OFF” position
or put the operation mode in OFF.
2. Open the glove compartment and remove
the connector cable (A, B) from clips (C).
3. Connect the connector cable to the iPod.
4. Connect the connector cable (D) to the
connector cable (B).
Be sure to hold the terminal part (A) of
the connector cable as shown in the illus-
tration.
5. Fix the connector cable (A, B) on the
clips.
1. Turn the ignition switch to the “OFF”
position or put the operation mode in
OFF.
2. Remove the connector cable (D).
How to connect an iPod
To connect
NOTE
 Use a genuine connector cable from Apple
Inc.
WARNING
 An open glove compartment door can
cause a serious injury or death to the front
passenger in an accident, even if the pas-
senger is wearing his/her seat belt. Always
keep the glove compartment door closed
when driving.
NOTE
 When closing the glove compartment, be
careful not to trap the connector cable and
iPod.
To remove
BK0236100US.book 107 ページ ２０１６年２月１日 月曜日 午前１０時１５分