Owners Manual

Head restraints
4-6 Seat and restraint systems
4
To reduce the risk of injury in an accident,
adjust the head restraint height so that the
center of the restraint is at your ear level
when seated. Any person too tall for the
restraint to reach their ear level when seated
should raise the restraint to the highest locked
position.
 To raise the restraint, pull it straight up.
 To lower the restraint, push down on it
while pressing the lock knob (A) in the
direction shown by the arrow.
 After adjusting the height, push down on
the restraint to make sure it is locked in
position.
Press the lock knob (A) in the direction
shown by the arrows. Then pull the head
restraint up and out of the seatback.
WARNING
 Driving without the head restraints in
place can cause you and your passengers
serious injury or death in an accident. To
reduce the risk of injury in an accident,
always make sure the head restraints are
installed and properly positioned when
the seat is occupied.
 In order to minimize the risk of a neck
injury due to a rear impact, the front seat-
back must be adjusted to the upright posi-
tion and the head restraint to the proper
position before vehicle operation. The
driver should never adjust the seat while
the vehicle is in motion.
 Never place a cushion or similar device on
the seatback. This can adversely affect
head restraint performance by increasing
the distance between your head and the
restraint.
Adjustment of the head
restraint height (front seats)
To remove
WARNING
 To help minimize the risk of neck injury in
the event of an accident, the head
restraints must be properly installed and
positioned to proper height before vehicle
operation.
BK0236100US.book 6 ページ ２０１６年２月１日 月曜日 午前１０時１５分