Owners Manual

Heater without air conditioning function (if so equipped)
7-4 Comfort controls
7
Air flows mainly to the windshield and the
door windows.
N00737701054
The heater can only be used while the engine
is running.
N00737801042
N00737901043
When the ignition switch is in the “ON” posi-
tion, select the blower speed by turning the
blower speed selection dial.
Turning the dial clockwise will increase the
blower speed; turning the dial counterclock-
wise will decrease it. When the dial is set to
the “OFF” position, all fan-driven airflow
will stop.
NOTE
 With the mode selection dial between the
“ ” and “ ” positions, air flows mainly
to the leg area. With the mode selection dial
between the “ ”and “ ” positions, air
flows mainly to the windshield and the door
windows.
Defroster position
Heater without air condi-
tioning function
(if so equipped)
CAUTION
 The engine speed may increase when the air
conditioning is operating.
With an increased engine speed, a CVT vehi-
cle will creep to a greater degree than with a
lower engine speed. Fully depress the brake
pedal to prevent the vehicle from creeping.
Control panel
1- Temperature control dial
2- Blower speed selection dial
3- Electric rear window defogger switch
 P. 5-83
4- Mode selection dial
5- Air selection lever
Blower speed selection dial
BK0249600US.book 4 ページ ２０１７年４月２０日 木曜日 午後１時３６分