Owners Manual

Towing
8-12 For emergencies
8
1. Align the tire air valve (C) and the wheel
cover notch (D).
2. Push the bottom (F) of the wheel cover
into the wheel.
3. Gently push in both sides (G) of the wheel
cover and hold them in place with both
knees.
4. Gently tap around the circumference of
the wheel cover at the top (H), then push
the wheel cover into place.
N00837001960
If towing is necessary, we recommend you to
have it done by a commercial tow truck ser-
vice.
When towing is required, transport the vehi-
cle using a tow truck.
Incorrect towing equipment could damage
your vehicle.
There may be local regulations concerning
towing in your area.
Obey the regulations of the area where you
are driving your vehicle.
NOTE
 Full wheel covers have a symbol mark (E)
provided on the reverse side to show the air
valve location.
Before installing the wheel cover to the
wheel, make sure that the opening with the
symbol mark is correctly aligned with the air
valve.
Towing
If your vehicle needs to be
towed
CAUTION
 Do not attempt to be towed by another vehi-
cle with a rope.
NOTE
 Do not use the tie-down hooks for towing.
These hooks are provided only for the pur-
pose of transporting the vehicle itself.
 Your vehicle cannot tow any other vehicle.
BK0249600US.book 12 ページ ２０１７年４月２０日 木曜日 午後１時３６分