Owners Manual

Replacement of light bulbs
Vehicle care and maintenance 9-27
9
N00943000132
The bulb should only be replaced with a new
bulb with the same rating and type. The type
and rating are listed on the base of the bulb.
N00950302043
CAUTION
 Do not install commercially available LED-
type bulbs.
Commercially available LED-type bulbs
could adversely affect the operation of the
vehicle, such as by preventing the lights and
other vehicle equipment from operating
properly.
NOTE
 If you are unsure of how to carry out the
work as required, it is recommended that
these procedures be carried out by an autho-
rized Mitsubishi Motors dealer or a repair
facility of your choice.
 Be careful not to scratch the vehicle body
when removing a light and lens.
 When it rains, or when the vehicle has been
washed, the inside of the lens sometimes
becomes temporarily foggy. This is the same
phenomenon as when window glass mists up
on a humid day, and does not indicate a func-
tional problem.
When the light is switched on, the heat will
remove the fog. However, if water gathers
inside the light, please have it checked by an
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
Bulb capacity
Outside
NOTE
Front
Description
Watt-
age
ANSI
Trad e No.
or Bulb
type
1
Front turn signal
light/Parking light
32/3 cp #1157NA
2
Headlight/Day-
time running light
(if so equipped)
—
9007
HB5
3
Front fog light (if
so equipped)
55 W H11
4
Front side-marker
light
5 W W5W
5
Side turn signal
light (on fender, if
so equipped)
5 W —
6
Side turn signal
light (on outside
rearview mirror, if
so equipped)
——
NOTE
 It is not possible to repair or replace only the
bulb for the side turn signal light (on fender).
Check with an authorized Mitsubishi Motors
dealer or a repair facility of your choice
when the light needs to be repaired or
replaced.
BK0249600US.book 27 ページ ２０１７年４月２０日 木曜日 午後１時３６分