Owners Manual

Replacement of light bulbs
9-30 Vehicle care and maintenance
9
2. Remove the bulb from the socket by turn-
ing it counterclockwise while pressing in.
3. To install the bulb, perform the removal
steps in reverse.
N00943601904
1. Insert a straight blade (or minus) screw-
driver with a cloth over its tip at the edge
of the cover (A) and pry gently to remove
the cover.
2. Remove the 3 screws (B) and remove the
light unit.
3. Depress the tab (D) on the harness con-
nector and pull the harness connector (E)
to remove it.
4. Turn the bulb (F) counterclockwise to
remove it.
5. To install the bulb, perform the removal
steps in reverse.
Front fog lights (if so equipped)
NOTE
 When unfastening the screw of the fog light,
be careful not to mistakenly move the beam
position adjustment screw (C).
BK0249600US.book 30 ページ ２０１７年４月２０日 木曜日 午後１時３６分