Owners Manual

Combination headlights and dimmer switch
5-78 Features and controls
5
N00532600570
 If the following operation is performed
with the combination headlights and dim-
mer switch in the “ ” or “ ” position,
the lights automatically turn off.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch is turned to the “OFF”
or “ACC” position or the key is removed
from the ignition switch and the driver’s
door is opened.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode is changed to OFF or
ACC and the driver’s door is opened.
 If the following operation is performed
with the combination headlights and dim-
mer switch in the “ ” or “ ” position,
the lights automatically turn off after
about 3 minutes.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch is turned to the “OFF”
or “ACC” position or the key is removed
from the ignition switch and the driver’s
door is not opened.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode is changed to OFF or
ACC and the driver’s door is not opened.
If the combination headlights and dimmer
switch is turned to the “ ” or “ ” posi-
tion again after the engine is turned off, the
about 3-minute auto-cutout function
described above will not work. The lights (the
parking lights, tail lights and license plate
lights) will stay on and will not turn off auto-
matically.
N00549800226
[When using a key to start the engine]
If the driver’s door is opened with the key in
the “OFF” or “ACC” position or removed
from the ignition switch while the lights are
NOTE
 Do not leave the headlights and other lights
on for a long period of time when the engine
is not running. The battery will run down.
 When it rains, or when the vehicle has been
washed, the inside of the lens sometimes
becomes foggy. This is the same as when
window glass mists up on a humid day, and
does not indicate a problem. When the light
is switched on, the heat will dry out the fog.
However, if water collects inside the light,
have it checked by an authorized Mitsubishi
Motors dealer or a repair facility of your
choice.
 Bi-xenon High intensity discharge (HID)
headlights (if so equipped) have the follow-
ing characteristics:
• The light will gradually change to bluish
white as the headlights are used.
• The life of the HID bulbs will decrease over
time if frequently turned on/off.
• If an HID bulb becomes dull, turns reddish,
or begins to flash, it must be replaced.
Contact an authorized Mitsubishi Motors
dealer or a repair facility of your choice
whenever it is necessary to repair the Bi-
xenon HID headlight or to replace the bulb.
Light auto-cutout function
(headlights and other lights)
NOTE
 The light auto-cutout function can be deacti-
vated.
See your authorized Mitsubishi Motors
dealer for details.
When you want to keep the lights
on:
Headlight reminder buzzer
BK0249500US.book 78 ページ ２０１７年４月２０日 木曜日 午後４時１分