Owners Manual

Vehicle care precautions
9-34 Vehicle care and maintenance
9
N00944001426
1. Push the light unit (A) toward the left side
of the vehicle to remove it.
2. Turn the socket (B) counterclockwise to
remove it, and then pull the bulb out from
the socket.
3. To install the bulb, perform the removal
steps in reverse.
N00945100166
In order to maintain the value of your vehicle,
perform regular maintenance using the proper
materials and procedures. Be sure to use only
those materials and procedures that meet your
local environmental pollution control regula-
tions. Choose the materials you will use care-
fully, to be sure that they do not contain
corrosives. If you are not sure, contact an
authorized Mitsubishi Motors dealer for help
in choosing these materials.
These can all be dangerous, and they all can
damage your vehicle.
N00945200095
After washing the inside of your vehicle with
any cleaner, wipe it dry in a shady, well venti-
lated area.
License plate lights
NOTE
 When installing the light unit, first insert the
tab (C) into the hole on the body, and then
push on the light unit to fit it into place.
Vehicle care precautions
CAUTION
 Cleaning products can be dangerous. Some
are poisonous and others are highly flamma-
ble. Some are dangerous if you breathe their
fumes in a closed space. When you use any-
thing in a container to clean your vehicle, be
sure to follow the instructions. Always open
your vehicle doors or windows when you’re
cleaning the inside. Never use the following
chemicals to clean your vehicle:
• Gasoline
• Carbon Tetrachloride
• Benzine
• Kerosene
• Naphtha
• Acetone
• Turpentine
• Paint Thinner
• Lacquer Thinner
• Nail Polish Remover
Cleaning the inside of your
vehicle
BK0249500US.book 34 ページ ２０１７年４月２０日 木曜日 午後４時１分