Owners Manual

Front seats
Seat and restraint systems 4-5
4
N00402301079
To adjust the arm rest angle, tip the arm rest
forward and then raise it to the desired posi-
tion. To release the arm rest angle, raise it
fully reward as shown.
N00435601476
The heated seats can be operated by pushing
the switch when the ignition switch or the
operation mode is in ON. The indicator light
(A) will illuminate while the heater is on.
1- To move the seat cushion up
2- To move the seat cushion down
Arm rest (Driver’s seat only, if
so equipped)
NOTE
 Do not stand or sit on the arm rest. It could
break.
Heated seats (if so equipped)
1 (HI) - Heater high
(for quick heating)
2 (neutral position) - Heater off
3 (LO) - Heater low
(to keep the seat
warm)
WARNING
 Persons who are unable to feel tempera-
ture change or skin pain due to age, ill-
ness, injury, medication, alcohol use,
fatigue or other physical conditions or
who have sensitive skin may suffer burns
when using the heated seat even at low
temperatures. To reduce the risk of burns,
people with such conditions must use care
when using the heated seat.
CAUTION
 Switch off the heated seats when not in use.
Operate the heaters at the “HI” position for
quick heating. After the seat has become
warm, set the heater switch to the “LO” posi-
tion to keep it warm. Slight variations in the
seat temperature may be felt while using the
heated seats. This is caused by the operation
of the heater’s internal thermostat and does
not indicate a malfunction.
 Do not place heavy objects on the seat or
stick pins, needles, or other pointed objects
into the seat.
 Do not place a blanket, cushion, or other
insulating material on the seat while using
the heater; doing so can cause the heater ele-
ment to overheat.
 When cleaning the seat, do not use benzine,
kerosene, gasoline, alcohol, or other organic
solvents; doing so can cause damage not
only to the surface of the seat, but also to the
heater.
BK0249500US.book 5 ページ ２０１７年４月２０日 木曜日 午後４時１分