Owners Manual

Keyless entry system (if so equipped)
5-8 Features and controls
5
N00546100114
Your keyless entry system operates on a radio
frequency subject to Federal Communica-
tions Commission (FCC) Rules (For vehicles
sold in U.S.A.) and Industry Canada Rules
(For vehicles sold in Canada). This device
complies with Part 15 of FCC Rules and
Industry Canada licence-exempt RSS stan-
dard(s).
Operation is subject to the following two con-
ditions.
 This device may not cause harmful inter-
ference.
 This device must accept any interference
received, including interference that may
cause undesired operation of this device.
N00544101218
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
2. Remove the screw (A) from the remote
control transmitter.
3. With the Mitsubishi mark facing you,
insert the cloth-cov-ered tip of a flat blade
screwdriver into the notch in the remote
control transmitter case and use it to open
the case.
NOTE
 You are provided with 2 remote control
transmitters, but you may register up to 4
remote control transmitters.
General information
WARNING
 Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
Procedure for replacing the
remote control transmitter bat-
tery
NOTE
 Be sure to perform the procedure with the
Mitsubishi mark facing you. If the
Mitsubishi mark is not facing you when you
open the remote control transmitter case, the
buttons may come out.
BK0249500US.book 8 ページ ２０１７年４月２０日 木曜日 午後４時１分