Service manual

6G7 ENGINE - Timing Belt - DOHC
(6) Check that the timing marks of the camshaft sprockets for
left bank are in alignment. Then install the timing belt on
these sprockets and hold it with a paper clip at the positions
shown in the illustration.
(7) Install the timing belt on the idler pulley.
(8) Install the timing belt on the crankshaft sprocket.
(9) Install the timing belt on the tensioner pulley.
(1O)Using the special tool, rotate the tensioner pulley clockwise
to tighten the center bolt.
(1 l)Remove the four paper clips.
(12)Using the special tool, turn the crankshaft a quarter turn
counterclockwise. Then rotate it clockwise to line up the
timing marks and check that all the timing marks are in
alignment.
1 TSB Revision