Service manual

Table Of Contents

667

ENGINE

Rocker Arms and Camshaft

SOHC

+64

ROCKER ARM, SHAFT AND BEARING CAP

INSTALLATION

(1) Apply a minimum amount of the specified sealant on the

four places of the cylinder head.

NOTE

Be sure the sealing agent does not swell out onto the cam

journal surface of the cylinder head. If it swells out,

immediately wipe it off before it can dry.

Specified sealant:

NUT Locking No. 4171 or equivalent

Apply sealant

No.

and

No.4

bearing cap mating surface

of cylinder head

(2) Install the rocker arms, shafts and bearing caps such that

the arrow mark on the bearing cap faces in the same

direction as the arrow mark on the cylinder head.

TSB Revision