Service manual

6G7 ENGINE - Oil Pan and Oil Pump
6EN0589
MD99871 7-01
Oil bump
I
case
7FNOld
7EN046t
OIL COOLER BYPASS VALVE
(1) Make sure that the valve moves smoothly.
(2) Ensure that the dimension L measures the standard value
under normal temperature and humidity.
Dimension L: 34.5 mm (1.358 in.)
(3) The dimension must be the standard value when measured
after the valve has been dipped in 100°C (212°F) oil.
Dimension L: 40 mm (1.57 in.) or more
INSTALLATION SERVICE POINTS
#A$ INNER ROTOR / OUTER ROTOR INSTALLATION
(1) Apply engine oil to the rotors. Then, install the rotors
ensuring that the alignment dots made at disassembly are
properly aligned.
I)B4 CRANKSHAFT FRONT OIL SEAL INSTALLATION
(1) Using the special tool, knock the oil seal into the oil pump
case.
NOTE
Knock it as far as it goes.
TSB Revision