Service manual

11 F-36
4G6 ENGINE <1993> - Timing Belt
6EN0663
REMOVAL SERVICE POINTS
gA0 TIMING BELT REMOVAL
(1) Mark the belt running direction for reference in reinstalla-
tion.
NOTE
(1) Water or oil on the belt shorten its life drastically, so the
removed timing belt, sprocket, and tensioner must be
free from oil and water. These parts should not be
washed. Replace parts if seriously contaminated.
(2) If there is oil or water on each part check front case oil
seals, camshaft oil seal and water pump for leaks.
(2) Back off the tensioner spring mounting bolt three turns.
(3) Pinching the end of the tensioner spring on the tensioner
side with pliers, unhook it from the bracket hook on the
tensioner to free the tensioner spring.
(4) Loosen the tensioner mounting bolt and remove the timing
belt.
OBo TIMING BELT REMOVAL
(1) Mark belt running direction for reinstallation.
NOTE
(1) Water or oil on the belt shorten its life drastically, so the
removed timing belt, sprocket, and tensioner must be
free from oil and water. These parts should not be
washed. Replace parts if seriously contaminated.
(2) If there is oil or water on each part check front case oil
seals, camshaft oil seal and water pump for leaks.
($0 TIMING BELT REMOVAL
(1) Mark the belt running direction for reference in reinstalla-
tion.
NOTE
(1) Water or oil on the belt shorten its life drastically, so the
removed timing belt, sprocket, and tensioner must be
free from oil and water. These parts should not be
washed. Replace parts if seriously contaminated.
(2) If there is oil or water on each part check front case oil
seals, camshaft oil seal and water pump for leaks.
c)Do OIL PUMP SPROCKET REMOVAL
TSB Revision
1