Service manual

4Gl ENGINE - Front Case and Oil Pump
INSTALLATION SERVICE POINTS
I)A4 INNER ROTOR / OUTER ROTOR INSTALLATION
(1) Install the outer rotor in the same direction as before noting
the mark put at the time of removal. Apply engine oil to the
entire rotor surface.
I
lEN00801
MD998305 n’
\
eB4 CRANKSHAFT FRONT OIL SEAL INSTALLATION
(1) Set the special tool on the crankshaft front end and apply
engine oil to its outer circumference.
(2) Apply a light coat of engine oil to the oil seal lip and then
slide the oil seal down along the special tool by hand until it
touches the front case. Install the oil seal in the front case
using the other special tool.
TSB Revision